Thursday, April 13, 2017

Final Problem of Practice Report

Background: I am a middle and high school math teacher at Connections Learning, which is an online education program for students. In a virtual environment, I am unable to offer direct instruction and be a part of my students learning process each day. Our curriculum is set up so that students work through lessons on their own, and learn the material through various teachlets, tutorials, videos and examples. Students are also given the online textbook to use for learning and completing practice problems.

Because students don’t work with their teacher every day, Connections Learning offers a free online tutoring service to its students. This service is called LiveTutor, and it consists of a virtual room staffed with teachers who are available throughout the day for students to access when they have questions. This is a great opportunity for students to interact with a live teacher and get help.


Problem of Practice: The problem that I researched this semester is that students do not use LiveTutor to get help when they have questions.
I used Standford’s Design process, which includes five different modes, in order to learn why this problem is occurring, and to come up with solutions to solve this problem.


Empathize Mode: I used three different methods in order to empathize with my students to better understand why they are not using this awesome resource:

1)      Interview – I spoke with 3 of my students over the phone and asked them questions about their daily math routine and their familiarity and experience using LiveTutor

2)      Survey – I emailed 15 students and asked them to complete a short survey to learn about their experiences with LiveTutor and their daily math routine

3)      Immersion – I simulated my students condition by working through a math lesson from start to finish, in order to experience what my students go through each day in order to complete their math work

Results:

I learned a few things by empathizing with my students in each of these ways. The survey results informed me that only 50% of students know what LiveTutor is. Please see Appendix A to view the results from my survey.

The survey results, along with the interviews I completed, also informed me that students are not spending enough time on their math lessons each day. 60% of the students I surveyed complete math in 30 minutes or less, and the students I interviewed shared with me that they spend an average of 15 minutes on math each day. I learned through my interviews that some students are just clicking through a lesson in order to complete it instead of taking the time to complete all parts of the lesson as intended in order to learn the material.

I learned through immersion that students should be spending an average of 45 minutes to an hour on math each day. When I simulated my student’s condition and completed a lesson from start to finish, it took me 35 minutes. This did not include spending any time using extra resources such as LiveTutor to get help, and also, since I already know the material, I was likely able to work through the lesson and complete practice problems at a faster pace than a student who is learning the content for the first time.

Empathizing with my students provided me with great insight as to why my problem is occurring. This allowed me to determine which direction to pursue to solve this problem.


Define Mode: After empathizing with my students, and completing the 5 Whys? Root-Cause Analysis (see Appendix B), I was able to identify the root causes of why my problem is occurring. This allowed me to define my problem from my point of view, which provided focus and my unique vision for moving forward with my project.

Problem Statement:

My online students don’t use LiveTutor, a free tutoring service that is offered to them, to get help throughout the day. There are two root causes for why this problem is occurring. The first issue is that many of my students do not know that this service is available to them to use. In order to address this issue, I am going to share this information with students in a way that will ensure that this information is not overlooked.
The second issue is that students who are familiar with LiveTutor and would benefit from this service are not spending enough time on math each day. Students have a tendency to rush through their lessons in order to get them done, as opposed to slowing down to learn the material and get help. I plan to help students see the benefit of taking their time to work through a lesson, completing practice problems and seeking help before moving on to the assessment at the end of the lesson. Using LiveTutor should be a part of student’s daily routine to get their questions answered, and I believe that students will use LiveTutor more often if they can experience how beneficial it is to their understanding and being successful.


Ideate Mode: I used various brainstorming and incubation techniques to generate ideas for possible solutions to my problem:

1)      I brainstormed with one of my colleagues via web conference, and we completed the Random Words technique that was described in Chapter 5 of “Cracking Creativity” by Michael Michalko. Please see Appendix C to view our notes from this brainstorming session.

2)      I kept an incubation journal. Please see Appendix D.

3)      “Work – Incubate – Revisit” Module 4 Lab Activity. Please see Appendix E.

4)      Module 3 Group Discussion Forum – idea shared with me from a classmate

Each of these activities led me to two possible solutions that I pursued in the prototype mode.


Prototype Mode: I created two prototypes that will help me solve my problem of practice:

1)      VIDEO – This prototype was designed to address one of the root causes of my problem, which is that students do not know about this resource. I created an 8 minute video tutorial that explains what LiveTutor is and how to use it. I will email this video to my students in hopes that they will learn about this awesome resource so that they can use it to get help. 

2)      ASSIGNMENT – This prototype addresses the second root cause of my problem, which is that students have a tendency to rush through their lessons, and don’t take extra time to practice or get help when they need it. I created an assignment that will require students to slow down, complete an entire lesson from start to finish as it is intended instead of skipping through parts just to finish, and it also requires students to attend LiveTutor and get help. My hope is that when students complete a lesson this way, they will experience the benefits of slowing down and using LiveTutor. You may click here to view the assignment prototype that I created. You may also click here to view the lesson that this assignment is linked to.


Test Mode: I chose 3 different methods to test my prototypes.

1)      First, I tested my prototype with the five students I surveyed in the empathize mode who did not know about LiveTutor. I emailed my video prototype to these students, and asked them to complete a survey after watching the video to learn if they now know what LiveTutor is. Please view Appendix F to see the survey questions. Only one of the five students I contacted responded.

This showed me that this prototype was not productive, since only one student watched the video and completed the survey.

2)      Next, I shared my prototypes with my sister, who recently graduated from college and can identify with the role of a student. She is also someone who will give me honest feedback from the perspective of someone who isn’t directly involved with my issue.

She let me know that the video I created is too long, and shared with me some tips for shortening it so that students will be more likely to watch it. She also suggested created a quick and easy assignment to go with the video, asking students to email me sharing one thing that they learned from the video.

We also reviewed the assignment I created, and she thinks that since students are already prone to rush through lessons, adding more work isn’t the best idea. I should modify and simplify the assignment by asking students to identify one topic from the lesson they were confused about, requiring them to go to LiveTutor to get help on this topic, and then submitting to me what they learned in LiveTutor to help. I should also let students know that I can check to see when they attend LiveTutor so that they do not make it up and pretend that they went to get help.

3)      Lastly, I met with a colleague, who experiences this same issue with her students. She gave me valuable feedback on the assignment that I created, and you may view the notes that I took on her feedback in Appendix G.


The feedback that I received from my students, my colleague and my sister gave me new ideas about how to redesign my prototypes so that they are more effective in solving my problem:

Video Redesign: I will recreate my video to be around 2 minutes long, and I will email it to students to watch and ask them to respond with one thing they learned from the video.

Assignment Redesign: I will ask students to complete the practice problems from the textbook and submit their work to me, identifying which problems they answered correctly and incorrectly by checking their answers in the back of the textbook. This will not add extra work for students, since this is already part of the lesson. I will then ask students to go to the LiveTutor room to get help on the problems they missed, and submit to me when they went and what they learned. Lastly, I will have students tell me how long the lesson took them from start to finish, including going to LiveTutor, instead of documenting each step of the way.


Conclusion: I learned that each mode of the design process is necessary in order create solutions that successfully solve problems. If any phase is not included in the process, you will miss out on key elements that are needed to inform your decisions along the way. I also learned that each phase will likely need to be completed more than once, and they do not necessarily need to be completed in this order when designing. For example, after working through one full cycle of Standford’s Design process, I will recreate my prototypes and test them again in an effort to create the best possible solutions to my problem.

I never considered myself to be a designer before this course. However, after learning about Standford’s Design process and completing one full cycle, I realize that anyone, including myself, can be a designer. Now that I have a process to follow, and have skills and tools to help me throughout the process, I can apply what I have learned in this course when designing in my career and personal life in the future.


Please click here to view the Appendix for this report.

Wednesday, April 12, 2017

CEP 817 Final Reflection Paper

My name is Angela, and I am a secondary mathematics teacher. Growing up, I loved math. Math was my favorite subject in school, because math just made sense to me. I was naturally able to understand and learn concepts, and I always enjoyed and did well in my math classes as a student. When it came time for me to decide what to pursue as my career, this was an easy decision for me. I wanted to become a teacher to share my love of math with students, and to help students be successful in their math courses.
As a “math person”, I identify as a left-brain thinker. I tend to be more analytical, and I love computing and solving problems. I don’t identify as much with right brain qualities such as creativity and visualization. As a student, I typically struggled in subjects like Language Arts on assignments that required the use of my imagination. Thus, when CEP 817 first began and I was working through Module 1, a few different thoughts crossed my mind.
First, I thought that I was going to struggle in this course, because the main purpose of this course is design. Design requires creativity, and I have grown accustomated to struggling in these types of courses and assignments as a student. Second, when reading through the Mod 1 lecture and Standford’s bootcamp bootleg steps for design, I was surprised. How could designing require so many steps? I am used to identifying a problem and coming up with a solution, just like that. I honestly didn’t think that all of these steps were necessary to design when first learning about them in this course.
I will be the first to admit just how wrong I was! I learned so much about the design process through this course that I didn’t know or understand before. Design is so much more than just identifying a problem and coming up with a solution. I didn’t realize that in order to design successfully, it is important to follow a process, and it takes time to do it well.
I learned that there are five different phases of the design process: empathize, define, ideate, prototype and test. By working through each of these phases in this course, I was really able to experience the value in each of these steps. I would like to share my experiences and what I learned by working through each phase of the design process.
 Empathize – Designing is really all about people, which is something that I did not realize before. What issues are people dealing with? Why? What solutions can be created to solve these issues and make life easier for people? These are some of the questions that revolve around design. I had previously thought that design was focused on products, but products would not be created if it weren’t for the people who will be using the products.
            Because design is human-centered, I learned that the empathize mode is critical. In order to empathize, you must observe your users and their behaviors, engage and interact with your users, and immerse yourself in their situations to experience what your user’s experience. The knowledge that I gained by empathizing with my users allowed me to recognize the root of the problem I was researching. Had I skipped this step, the solutions that I would have brainstormed likely wouldn’t have solved my problem, because they would have been superficial as opposed to being designed specifically to address the reason why my problem is occurring.
Define – The define mode is one of the modes that I reviewed in Module 1 that I didn’t really see the value in. I didn’t understand why this phase was necessary in the design process. After empathizing and working through the define mode, I learned why it is important to stop and define your problem before continuing forward.
            During the empathize mode, I gained a lot of insight into my user and why my problem was occurring which I didn’t know previously. Before moving on and starting to brainstorm solutions, it is necessary to stop reflect on this insight. This insight allowed me to clearly see what my user needs and why my problem is occurring. Now, I can confidently state from my point of view, what my problem is and my vision for solving it, which provides necessary focus and direction for moving forward.
Ideate – The ideate mode is one of the phases that I initially thought I would struggle with, since it involves being creative to come up with a variety of solutions. As I mentioned, creative thinking is not one of my strong suites. However, I learned about two types of working/thinking that allowed me to productively ideate and think creatively in order to come up with possible solutions.
            The first type of thinking is brainstorming, which is the process of actively working to come up with ideas. When brainstorming during this mode, I met with one of my colleagues and we brainstormed together. Although I personally don’t identify as being a creative thinker, when working together with someone else it is easier for me to do this since I am working with another mind and not just relying solely on myself to create. Also, I learned about a variety of techniques that can be used when brainstorming, such as the random words technique, to spark divergent thinking.
            The second type of thinking is incubation, which is a less active process that allows ideas to arise in our minds over time. The incubation techniques that I used in this course were keeping an incubation journal, and also the “work-incubate-revisit” lab activity. I always struggle with sitting and trying to actively come up with ideas, however by allowing the ideas to develop over time, my unconscious mind was able to work on my problem and develop ideas.
The brainstorming and incubation techniques that I learned about and used in this course really allowed me to think creatively in a productive manner which I never felt like I could excel at before. I learned that there are many different ways to generate ideas that allow someone like me to create even if I don’t consider myself to be a creative thinker.
Prototype – I was really intrigued during module 1 when I learned that there was a prototype mode in the design process. I am a big fan of the TV show Shark Tank, where small businesses pitch their ideas to investors. Often times a business will present a prototype, and I never quite understood what this meant and how it was different from the real thing. I was excited that I would finally be learning exactly what a prototype is in this course.
I learned that a prototype is the first thing that you create in the design process, it is basic and has form, and is the initial version of what you are working on. I now understand why an investor might not want to invest in a company with only a prototype, since they have not yet developed the finished product. Prototyping is a necessary phase in the design process in order to come up with a product that effectively solves a problem, however more work and research is required to get to that point. It may be too early for an investor to get involved unless they are very passionate about the prototype and the problem that is being solved, and are willing to spend the extra time that is needed to create the final product.
I enjoyed the prototyping phase because not only did I learn and understand what a prototype is, it was very satisfying to finally create something tangible from all of the research and thinking that I had been working on leading up to this point.
Test – The testing phase was perhaps my favorite part of the whole process. Coming into this phase, I felt really good about the ideas I had come up with and the prototypes I created. By testing my prototypes, I received great feedback that will allow me to recreate my prototypes to make them even better. There were some things that I did well, but also some things that didn’t work, and testing allowed me to realize these things or for them to be pointed out to me.
I learned two key ideas through testing. First, it is important to receive feedback from a variety of resources. I tested my prototypes with my students, a colleague and my sister. I learned something different by testing with each of these resources, and putting all of their feedback together will allow me to make the best possible changes moving forward. Second, I learned that it is important for your users and sources to be honest with you when giving feedback. It is great to hear what you did well, but it is equally as important to recognize any flaws in your design in order to make improvements.
As you can see, I learned so much about the design process that I didn’t know before taking this course! Although in this course I completed each mode in a certain order, design is actually a process that cycles and recycles through each phase. Based on the feedback I received during testing, I will recreate my prototypes and test again. By actually completing each mode of the design process and experiencing each phase on my own, I truly learned the importance of each step in order design solutions that really work and solve problems.
Now that I have developed an understanding of the design process, I can see how valuable design is in education and in my professional life as a math teacher. There are constantly problems that need to be solved, for example issues with student motivation, curriculum and student learning, or something like what I researched this semester about students not using resources that are available to them to help them learn. These are all great opportunities to use the design process and way of thinking.
In order to solve any of these issues in education, it starts with students. Ultimately, my main goal in teaching is to help students learn, develop life skills, and be successful. Understanding what my students experience, how they learn, their needs, and what is important to them, is the first step to solving most problems that I experience. In the classroom and in my teaching, it is important for me to empathize with my students and truly get to know them to inform how I make decisions.
It is also important for me to be open-minded when trying to come up with possible solutions to problems that I have defined. I now have brainstorming and incubation skills that I can use when using ideation to think of a variety of ways to solve problems. These skills have allowed me to be comfortable doing something that I normally am uncomfortable doing, which is being open-minded and using my imagination to come up with ideas. Going forward, I am grateful for these skills that will allow me to think creatively not only in my professional life, but in my personal life as well.
Lastly, in order to productively solve problems in my career, it is essential for me to constantly be testing and redesigning my prototypes to progress towards a final product. I received such great feedback and insight in this course by testing my prototypes with my students, a colleague and my sister, that I will continue to use a variety of resources to test my prototypes with. Feedback and other discoveries that are uncovered during testing are the best indicator of if my prototypes are useful, and will allow me to learn what changes can be made. Testing is a key factor that I will use to inform my design decisions in education moving forward.
All in all, I learned a great deal about design from this course. By starting from the beginning and identifying a problem, and then progressing through each mode of the design process, I was able to experience and learn why each of these modes is necessary to design a product that effectively solves a problem. I gained many skills that I can now use and apply in my professional life as a mathematics teacher. I look forward to becoming a skilled designer in my field throughout my career in education using what I have learned from this course.



Thursday, April 6, 2017

Problem of Practice: Test Mode

I am an online math teacher to middle school students. The problem that I have been researching is that my students do not use the online tutoring service, called LiveTutor, which is available to them to get help in their math course. I identified two underlying causes of this issue, and I created a prototype to address each of these causes.

The first reason that students don’t use LiveTutor is because they don’t know about it. I created a video that explains what LiveTutor is and how to use it, which I will send to my students to solve this problem. The second cause of this issue is that students have a tendency to rush through their lessons, and don’t take the extra time to practice and get help when they need it. To address this issue, I created an assignment that requires students to slow down and complete an entire lesson from start to finish as it is intended, and it also requires students to attend LiveTutor to get help.

I chose 3 different methods to test my prototypes. First, I tested my prototypes directly with my user, my students. Second, I shared my prototypes with a colleague. And third, I shared my prototypes with my sister. Below I will explain why I chose each method, my protocol, what happened and relevant outcomes for each method.

1)   My first approach involved testing my prototype with my students. During the empathize mode, I surveyed a few students to gather information about my problem. I was able to receive useful feedback through a survey because the majority of the students who I emailed followed through and completed the survey. From the survey I learned that there were a handful of students who didn’t know what LiveTutor was, so I decided to email the video I created to these students. I also asked them to complete a survey after watching the video to learn if they are now familiar with LiveTutor. I emailed my video and survey to five students who initially responded that they don’t know what LiveTutor is, and only one student completed the survey. You may click here to view my survey questions, which was my protocol.

This shows me that this prototype wasn’t necessarily productive, since I only know for sure that one out of five students watched the video and completed the survey. In order for this prototype to work, students must watch the video that I email to them to learn about LiveTutor. I received some good feedback from my sister was to why my students may not have been receptive to my video.

2)   My second approach involved sharing my prototypes with my sister. I felt that it would be beneficial to reach out to her for a few reasons. First, she recently graduated from college, so she can still relate to being a student. Second, I wanted to hear someone’s perspective who isn’t directly involved with my issue. Lastly, since she is my sister, I know that she isn’t afraid to hurt my feelings and will be honest with me.

First we looked at the video I created, which was almost 8 minutes. She let me know immediately that this was too long. Students will likely watch it if I recreate it to be around 2 minutes. We went through the video slide by slide, and she gave me some great tips. The second slide of the video I can completely cut out, which takes up a few minutes of the video. I also should only use bullets, no full sentences. She suggested that I create a quick and easy assignment that goes with the video. When I email it to students, the assignment will require them to email me back with one thing they learned from the video. 

My sister and I also looked at the assignment that I created to encourage students to slow down and complete an entire lesson from start to finish, going to LiveTutor as a part of that process. She thinks that since students are already prone to rush through lessons, adding more work isn’t the best idea. She didn’t like how I have students document each step of the lesson, because it is likely that students will just make it up. She thinks that I can rework the assignment so that I just ask students to identify one thing from the lesson that they were confused about, and then require them to go to LiveTutor to get help. This assignment should include: identify one topic from the lesson they were confused about, when did you go to the LiveTutor room to get help, and what did you learn while in LiveTutor that helped you understand what you were confused about. I should be upfront with students and let them know that I can check and see when they attend LiveTutor so that they will not just make up a time and pretend that they went to get help.

3)   My third approach for getting feedback included meeting with a colleague. I knew that it would be valuable to hear form someone who is in my position and experiences this issue with students. My colleague and I focused on the assignment that I created required students to complete a lesson and go to LiveTutor. We went through the assignment from start to finish, and I took notes on her feedback. You may click here to view my notes. This feedback, in combination with the feedback I received from my sister, has given me a great idea about how to redesign this assignment to make it more effective.

I learned a lot from the testing process. First, I learned that it is important to get feedback from a variety of resources. The feedback I received from my students, my sister and my colleague all influence how I will redesign my prototypes:

Video Redesign: I learned from my students that the video was not successful, since only 1 out of 5 students watched the video and completed the survey. My sister helped me to see that the video was likely too long, and gave me some good tips on how to shorten it. I will recreate this video to be around 2 minutes long, and will then send it to students to test and see if it is more successful. I will also ask students to share with me one thing they learned from the video.

Assignment Redesign: I will combine the feedback I received from my sister and my colleague to redesign my assignment. I will ask students to complete the practice problems from the textbook and submit their work to me, identifying which problems they answered correctly and incorrectly by checking their answers in the back of the textbook. This was suggested to me by my colleague. Having students do this will not add extra work to the lesson, since this is already part of the lesson. I will then ask students to go to the LiveTutor Math room to get help on the problems that they missed, and also submit to me when they went and what they learned. This was suggested to me by my sister. Lastly, I would like to include my colleagues suggestion of having students tell me how long the lesson took them from start to finish, including going to LiveTutor, instead of documenting each step of the way which my sister shared may not be the best idea.


Because I reached out to multiple resources for feedback, I was able to combine different aspects of what I learned to redesign my solutions. I also learned from the testing process that it is important to reach out to users who will be honest with you. It is important to hear the strengths of your solutions, but it is equally as important to learn the flaws. When using this process in the future, I will be sure to test solutions with multiple sources who will be honest when sharing their feedback.

Tuesday, March 28, 2017

Mod 6 Lab Activity

Testing

Throughout this course, I have been addressing an issue that I experience in online education with middle school math students. The school that I teach for offers a free online tutoring service to my students. The problem that I have been researching and designing solutions for is that students do not use this awesome resource to get help in their math course.

I created a YouTube video which explains the process that I used to test my solutions. This video is quite general; I do not dive into my specific problem, because I want whoever uses this video to be able to apply the process that I used when testing to their specific problem is. You may view my video below, I hope that you enjoy!


Tuesday, March 14, 2017

Problem of Practice: Prototype Mode

I created two prototypes that will help to solve my problem of practice, which is that my online secondary students do not use the online tutoring service, LiveTutor, that is available to them to get help in their courses.

1) VIDEO

The first prototype is designed to address one of the root causes with my problem, which is that students do not know about this resource. I created an 8 minute video tutorial that explains what LiveTutor is and how to use it. I plan to email this video to my students in hopes that they will learn about this awesome resource and use it to get help.


2) ASSIGNMENT

My next prototype addresses the second root cause of my problem, which is that students have a tendency to rush through their lessons, and don't take the extra time to practice or get help when they need it. I have created an assignment that will require students to slow down, complete an entire lesson from start to finish as it is intended instead of skipping through parts just to finish, and it also requires students to attend LiveTutor and get help. The assignment that I created is just a draft, but you should be able to get a good idea about what this will look like.

You may click here to view the assignment prototype that I created. You may also click here to view the lesson that this assignment is linked to.


THE PROTOTYPING PROCESS

The prototyping process was enjoyable for me. It was great to finally create something tangible from the ideas that I have been thinking about over the past few weeks. I learned this week that prototypes don't have to be finished products. The first prototype that I created with the video is a finished product that I could send to students right now, however I would certainly share it with colleagues and receive feedback on it first. The second prototype isn't a finish product yet, it is just a draft assignment, but after receiving feedback and spending more time perfecting the assignment I can really start to see what the final product will look like and how it will work for students. I am excited for the next phase of testing and to receive feedback on my prototypes :)

Monday, March 13, 2017

Module 5 Lab Activity - Everyone Matthers

I created a display to represent the big ideal that everyone matters. I used a stuffed animal, rubber bath toys, a book, and a Kleenex box, and I placed them around a sign that says "peace".




I really enjoyed the process of taking my thoughts and using objects to create a physical prototype. The construction process didn't change my idea, but I learned that sometimes you will need to think creatively when creating a prototype like this. The biggest challenged I faced was finding an object to elevate the book on that related to my theme. The Kleenex box worked perfectly, I just had to be creative about how it connects with the idea that everyone matters. 

No matter your color, size, shape, etc. all people and animals are important and deserve to be loved and treated as so. I think that the Kleenex box adds nice color to this display, however it also represents that we must be there for everyone, no matter who the person is, to love, to help, to support, and to offer a shoulder to cry on.

Friday, February 24, 2017

Problem of Practice: Ideate Mode

Part 1 of Ideation – Do a Brainstorm Session

I brainstormed with one of my colleagues in my LiveLesson room. My school uses Adobe Connect for web conferencing and hosting meetings with students, and this is where I chose to collaborate and brainstorm. I started off our session by defining my problem of practice to my colleague and the purpose of this session.

I decided to use the Random Words technique that was described in Chapter 5 of "Cracking Creativity" by Michael Michalko. I pulled out a book from my book shelf and selected 5 words at random. To respect my colleagues time, we set aside 30 minutes for this session, and we were able to work through the first three words that were selected.

We focused on the words head, rock and seat. We each started off by drawing a picture of the image on the whiteboard. We then listed characteristics of the word, made connections between each characteristic and my problem, and summarized the principle of each word and how an idea could be built around it. Below are screen shots of the whiteboard with our drawing and notes.








Part 2 of Ideation – Keep an Incubation Journal

Below is a photo of the journal I kept this week where I jotted down ideas as they came to me. 



Part 3 of Ideation – Reflect on the Ideas

I really enjoyed the process of Ideation through brainstorming and incubation. One thing I learned was how many different ways there are to generate ideas. Whether collaborating with others through different brainstorming techniques, or through individual reflective processes such as incubating and keeping a journal, there are multiple ways in which ideas can come about. I enjoyed all the different types of Ideation that I participated in.      


Going forward, I would like to focus on the idea that I came about during the Mod 4 Lab Activity. This idea involves creating an assignment that is attached to a specific lesson that requires students to log their process of completing the lesson from start to finish, including going to LiveTutor to seek help towards the end of the lesson (more details about this assignment are posted in my Mod 4 Lab post). I would also like to pursue creating a short video to email to students, specifically about LiveTutor, to make sure that all students know what LiveTutor is and how to use it. This idea came about in a few different ways. First, it was suggested in feedback I received from a classmate during Module 3 in our group discussion forum, and from feedback I received on my Problem of Practice Define Mode Activity in Module 3. Also, as I read through the Mod 4 lecture, I was able to experience short video tutorials as a learning tool first hand and reflect on their benefits during the incubation process.              

More ideas were generated during the Ideation process through incubation and while brainstorming with my colleague. It is difficult to choose which ideas to move forward with; however I believe that the two ideas above will best address my problem and the underlying reasons behind why my problem is occurring.